The Importance of Underlayments That Can Meet Roof Temperature Specifications

By GCP Applied Technologies. 

Make sure your underlayment can perform in high heat situations and maintain thermal stability. 

More homeowners are switching to metal roofs and insulated roof decks to improve energy efficiency. Safeguarding the thermal stability of a roof is important, a key element to achieving this is through finding the right roof underlayment designed for the job. Most roofing underlayments perform admirably in normal rooftop conditions, but there are some circumstances where a roofing underlayment needs to meet a higher in-service temperature: 

• Darker colored roofs 

• Roofs in climates like the southeast U.S. where there’s longer sun exposure 

• Roofs in high altitude regions where the UV rays are stronger 

The configuration of the roof assembly and the placement of insulation in the assembly will also play a factor in determining the in-service temperature. For example, if the building has a vented roof with insulation directly on top of the ceiling, air can come into the structure at the eaves and vent out at the ridge of the roof. This air flow helps the underlayment to remain cooler due to intake and exhaust of air. 

Using unvented assemblies with insulation that is directly in contact with the roof deck creates a high amount of stress on the roofing underlayment because the heat essentially has nowhere to go. This drives up the surface temperature of the roof. If the roof becomes too hot, the adhesive used in the self-adhered roofing underlayment may soften. This can result in sticky adhesive dripping onto the exterior of the building or finding its way into gaps in the roof sheathing or plywood and getting into the building itself. 

In most cases where there is a vented roofing assembly, a standard roofing underlayment will have the sufficient heat resistance to prevent this. However, if the roofing design is likely to result in a more extreme in-service temperature, it’s safer to switch to a roofing underlayment designed for high temperature. 

In these cases, the roofing adhesive has been modified to perform in high heat, without softening. These high temperature (HT) products are generally designed to perform up to 240° F. There are also certain situations, (such as with copper or zinc roofs with unvented roof assemblies), that call for roofing underlayments with butyl adhesive, which are designed to perform up to 300°F. 

Before selecting a roofing underlayment, check into tools like WUFI® hygrothermal modeling to help assess the likely in-service roof temperature. In addition, look into the temperature performance window of the various underlayment products. This will help protect the roofing assembly and ensure it performs well for the long run.  

Have a question? AskARoofer.  

Find your local roofing contractor in the RoofersCoffeeShop® Contractor Directory. 

Original article source: GCP Applied Technologies