Explore the Differences Between Low-slope and Steep-slope Roofs

Polyglass Differences between Steep and Low Slope
November 12, 2021 at 6:00 a.m.

By Polyglass. 

While there are only two categories of roof designs to choose from, each comes with many project possibilities. 

Both low-slope and steep-slop roofs have their respective advantages for the ever-varying array of roofing projects. In this article, you will learn some crucial differences between low-slope and steep-slope as well as which roofing products work best with each roof design option. 

Before we jump in, it’s important to note how slope is measured so you can determine whether you’re dealing with a low-slope or steep-slope roof. Of course, virtually every roofing system is sloped to some degree. Even so-called “flat roofs” aren’t truly flat — they simply have a very modest slope.  

In professional roofing settings, slope (or pitch) is defined by how much the roof rises vertically for every 12 inches of horizontal length. It is then expressed as a ratio of rise/12. For example, if a roof’s elevation changes by 2 inches for every foot of length, the slope is 2/12. If it rises by 4 and one-quarter inches, the slope is 4.25/12.  

Low-slope roofs  

What makes a roof “low-slope?” Honestly, it depends on who you ask. The Occupational Safety and Health Administration (OSHA) officially defines a “low-slope” roof as any roof with a slope of less than 4/12. However, some roofing companies define low-slope as 3/12 or less, and others 2/12 or less. (For our purposes, let’s go with the OSHA definition.)  

Benefits/considerations of low-slope roofs  

Low-slope roofs offer several advantages, especially for commercial buildings. First of all, low-slope roofing provides a “bonus floor” of sorts, allowing for placement of large equipment like HVAC units on the roof, and even allowing foot traffic. Low-slope roofs are also more affordable to install because they require fewer materials and involve less risk to the laborers. The tradeoff with low-slope roofs is that they must have impeccable waterproofing and must be kept free of debris to prevent water ponding and leakage.  

Common types of low-slope roofs

  • Built up roofs (BUR) have multiple alternating layers of asphalt and reinforcing fabric, usually with a gravel top layer  

  • Modified bitumen is a membrane of asphalt combined with rubber or plastic polymers, typically installed in two layers (base sheet and cap sheet)  

  • Single-ply roofing membranes are either rubber-based (EPDM) or thermoplastic (TPO, PVC)  

Steep-slope roofs  

Now let’s move on to discuss steep-slope roofs.  

Sticking with OSHA’s definition, a steep-slope roof is any roof with a slope greater than 4/12. Steep-slope roofing is largely used on residential structures, but sometimes occurs on commercial buildings, as well.  

Benefits/considerations of steep-slope roofs  

Aside from being generally aesthetically pleasing, steep-slope roofs enjoy fairly low maintenance because rain, snow, and debris drain off of them easily. The “attic” space may also provide a heat buffer to the outside, making the building easier to heat and cool. The disadvantage is that steep-slopes create more unusable space in commercial buildings, are more expensive to install and are more dangerous to maintain because of the roof angle.  

Common types of steep-slope roofs  

Asphalt shingles are by far the most common roofing material for steep-slope roofs. Metal roofing is also quite common (e.g., aluminum, copper). Clay tiles and wood shake are also common, although generally expensive.  

Using Polyglass products for low-slope and steep-slope roofs  

Polyglass is committed to helping professional roofing companies make the best use of our products — whether you’re working with a low-slope roof or a steep-slope roof. Don’t miss our video installation guides for low-slope roofs and steep-slope roofs.  

Low-slope roofs  

Polyglass offers a full range of reliable self-adhered modified bitumen products for low-slope roofs, along with high-quality underlayments, elastomeric coatings and more.  

Steep-slope roofs  

Polyglass offers numerous high-quality underlayment products to provide excellent waterproofing for steep-slope roofs. Watch the video below for more details. 

Have a question? AskARoofer.

Find your local roofing contractor in the RoofersCoffeeShop® Contractor Directory.

Original article source: Polyglass



Comments

There are currently no comments here.

Leave a Reply

Commenting is only accessible to RCS users.

Have an account? Login to leave a comment!


Sign In
AAR - MRA - Banner Ad - Buyer
AAR - Malarkey - Sidebar Ad - Shingles That Reduce Air Pollution
Tremco - Sidebar Ad - Don
DaVinci - Sidebar Ad
IKO - Sidebar Ad - Strong Winds
AAR - MRA - Sidebar Ad - Buyer