Leaves are an enemy to roofs

leaves are a roofs enemyLeaves left on a roof can cause much damage and is an enemy of your roof.  We all love our trees and as every fall comes, the leaves can really pile up fast, including on the roof and in gutters. These piles of leaves, if left for the winter, can become a real problems. Piles of these leaves can dam up water allowing it to move sideways and get into places rain water was not ever ment to be. I have seen many roofs less than ten years old develop problems when left without some type of maintenance like roof cleaning.

Even the finest roofing systems can fail with leaves that pile up. As the leaves decompose it allows small particles of debris into the nooks and cranny’s of your roof, clogging up the roofing system.  This dammed up of rain water, can cause mold and mildew of the roof organic underlayment and fail. Once the underlayment has failed you have major issues that will cause leaks into the home.

Most tile roofs are installed on a batten system and can be difficult to walk on to clean. Most people don’t realise that a flat profile tile allows a lot of water under the tiles. All tile roofs are designed to move the water downwards if and when it gets on the underlament. When there is excessive water or dams that build up these expensive roof can fail. Tile roofs are easily broken if walked on and should be cleaned by a professional.

tile valley debris

How to solve roof leaks

Having a great underlayment is your last stand against water intrusion. No matter what type of roofing you have most manufacturers recommend a leak barrier or Grace Ice and Water Shield in areas like eaves and valley’s. Products like this are typically 40 inches wide and are a peel and stick application that protects your roof better when used with felt or synthetic underlayment. Of course the best solution is to clean the roof a couple of time a year from leaves and debris and give your roof a fighting chance.

TIP  When walking on a tile roof try not to step in the center of the tile. This area of the tile is the weakest. The best area to place your foot is, the first three inches from the butt of the tile because it is supported by the tile below it and is the strongest part of the tile.



About author

Bob 270 posts

Since 2005 Bob has been answering questions, free of charge, here at AskARoofer.com. With a strong background in residential roofing and provides a practical and simple answers to hundreds of roof related questions, so it is easy to understand the issues you may have with your roof. Our answers are free so feel free to ask what you want. Use the green question box to contact myself or AskAroofer.com I have spent ten years as a union shingler, seventeen years as a California licensed roofing contractor with a general contractor endorsement and since Feb. of 2005 a roofing consultant. If I don't know the answer to your question, I will point you in the right direction.

You might also like

What went wrong 1Comments

Why does moss grow on rooftops?

Moss forms on a roof when it is wet or constantly damp and shaded. It occurs most of the time on the north side of homes in the northern hemisphere

What went wrong 4 Comments

OSB and Plywood buckling roof

OSB and Plywood buckling roofs can be solved very easily. Have you ever seen a roof that has had areas that were lifting up? It looks like a big air bubble

The Roofing Process 0 Comments

Scammed by a Roofer

11 ways to get scammed by a roofer.   1. As soon as you enter an agreement with your roofer, pay him in full and give him cash.   2.When


No Comments Yet!

You can be first to comment this post!

Leave a Reply